Accessing the headlight bucket, wiring, fuses, on a RS or RT.
Cleaning the headlamp assembly. Aiming the headlight
on all models.
© Copyright 2019, R. Fleischer
The fairing-equipped Airheads began with the 1977 R100RS. The headlight bucket is basically the same as in the unfaired models (except for later models not having fuses, etc., in the bucket). The bucket is not part of the fairing. On the RS and RT the bucket is located behind the front-most protective glass that is part of a 'tunnel' assembly with a large protective rubber molding with an outer glass, etc., whose design is such that it offers a relatively smooth front surface to oncoming wind, etc. The expensive outer glass has some orange lines on it. There is no purpose to those lines (stories abound, all wrong) except to draw the eye away from the quite large front glass. While the orange lines were purposely installed for that stylish effect, the headlight/bucket was quite far inwards from the front of the fairing, and thus the outer fairing tunnel glass needed to be of substantial size to prevent narrowing of the headlight beam. There is no aiming or other purpose to the orange lines.
Don't do any disassembly of the fairing beyond what is noted below, unless you have a good reason to do so!
1. Fold back, barely (just a small amount), one corner at a time, each corner of the rubberized material surrounding the $$$ glass in the fairing. That will just barely expose a phillips screw at each corner.
- Written by Robert Fleischer