running lights – Airheads Beemer Club

I originally wrote this piece some seven years ago in 1995. Finding that the last of my modified bulbs burned out one filament the other day, I had to make some more up, which gave me an opportunity to revisit the article and to make it more useable.

Note that most if not all states require that any taillight or running light on the rear of a vehicle be RED as per D.O.T. guidelines unless it is used to illuminate the license plate.

The idea is to increase visibility of a motorcycle by the addition of two permanently illuminated rear running lights. Added to the central red light this gives three rear facing lights, allowing car drivers to triangulate on three light sources rather than one, enhancing their depth perception and improving the biker’s safety

I had fitted Full Scale Designs’ running light kit to the front and rear of my K100LT. A nice installation on a not so nice motorcycle, now sold and unlamented. The installation described here is not as elegant as FSD’s but is equally effective. It has the merit of being much cheaper. You can also buy a ready made kit from www.run-n-lites.com for $30 plus a $50 core charge (as of August 2002). I cannot find a listing for FSD.

You must be a member to view complete articles on this website. If you are already a member, you can log in here. If you aren’t a member yet, you can purchase a membership here.

This article deals specifically with converting the two Airhead rear turn signals into running lamps, while retaining the original turn signal function. Considerable information is applicable to a FRONT turn signal lamps conversion, if desired.

This article does not deal directly with conversions to the Classic K-bikes, such as the K1, K75, K100, K1100. MUCH of what is in this article on the physical modifications ARE applicable to K bikes, Oilheads, ETC. The K-bikes have a bulb-monitoring relay; which complicates matters, & information on modifying them is in item #2 in http://bmwmotorcycletech.info/K-hints.htm.

Adding running lamp functions to the rear (and/or front) MAY add to safety. You get more lights, & you have two lights that are illuminated in case your one rear stock running lamp burns out; many bikes have only ONE rear running light & if it fails you might be INVISIBLE to cars coming up towards your rear; which is one of the arguments FOR this conversion. My primary argument against this conversion is that the turn function is, or can be, less noticeable to car drivers ….due to the running lamp function in the same lamp, same housing (could be separate lamps on fronts, some bikes). You must decide for yourself. Proper installation with proper color of lens & proper lamp bulb may negate such arguments.

The conversion may not be legal in some States, ….if the lens is not re-colored to be RED (or the lamp colored red). Careful selection of bulb & possibly inclusion of reflective aluminum foil may improve brightness.

There are potential problems if not done well, the turn signals might then not be as distinctly different from the running lamp function. Properly done they certainly CAN be very distinctly different. Several ways to go about it, including a small unpainted or no red insert area, in the middle of the lens, or, a band across the center. One can find red bulbs plus use aluminum foil as a reflector, if desirable. The reflectors & lenses of the stock bike are OPTIMIZED for incandescent lamps, NOT LED types. I do NOT recommend LED lamps (of any type I have so far seen) for purposes of this article although wide angle LED lamp structures may now be available. RED LENSES have been available at times, almost a perfect direct replacement for your amber ones; you need only to provide a rubber gasket (easy and only if you wish to), and in a few instances about a minute of filing, depending on if plastic or metal case. The ones I have seen have an even better than stock amber lens light diffusion/reflection in the lens. Check such as Ebay. The ones I saw have number K22750 and K32724 on the plastic cover & were made by CoolBeam MTP; they are marked as SAE & DOT approved. These are hard to find in the USA. I have a set on my bike. If you find a source, PLEASE let me know so I can publish it here.

The conversions in this article are for incandescent lamps. You are free to experiment with plug-in LED lamps, but I have not done much experimentation so far.

You must be a member to view complete articles on this website. If you are already a member, you can log in here. If you aren’t a member yet, you can purchase a membership here.

Tag: running lights

Running Lights on a /6

Adding Running Lamp To Turn Signals