By "hidden" I only meant to infer there was a seal between the reservoir and metallic body that could not be seen unless you completely stripped the m...

That is NOT what I said. I have no opinion on Spectro. So, just add the oil (not sure on exact quantity) 3 quarts? And crank it with the carbs dry...

Bruce - Welcome aboard ! ► Generally, if one sticks to a solid plan to change the oil every 5000 miles, and is using a name brand oil, then there ...

I think you'll be OK. • "Dielectric grease" simply works by excluding water, but it does nothing to actively control or fight connector corrosion. W...

I really think the doctor simply had a new screw gun and was looking for a victim to try it out. You know how guys and their new tools can be !! Alt...

There are many reasons the switch could be feeling loose. You simply need to wait until you get inside. The terminals could have receded or worn way d...

Ray - The contacts are spring loaded to push against the inside of the plastic terminal end cap. Most probably the terminals are either slightly bur...

Craig - I can fully appreciate your situation. I realize that my process has been designed for my local climate and situation. There is no one-size-...

I looked and looked. No one else uses that 24mm barrel diameter. I finally ended up repairing an OEM switch. It's a complicated design, but very sturd...

Very glad you're pleased, but I think your improved response within 50kM was more than likely due mainly to filling up with fresh fuel along the way. ...

The KatDash FAQ is a great write-up, and touches on many of the same details I covered. A VERY important subject they brought up was that the very f...

► Believe you have that backwards. The OEM incandescent bulbs are high resistance. When you have 2 incandescent bulbs, there is enough resistance in t...

Mark - I took a long time, thought about your issue, and typed you up a very lengthy reply because I thought you were serious about repairing this b...

Mark - Welcome Aboard !! Why don't we start with some basics.... First of all, lets make sure you have the correct plugs before we go changing...

Another happy customer ! ?