Now I understand ! The tip that fits through the auto advance unit needs repair. Be it broken or stripped, the repair would be very similar, but you h...

• All tires made since the mid-1970's are marked with their manufacture date. The code is on one side ONLY. The code typically is done in a part of th...

• 8mm or 5/16 inch ID. I've been using US made fuel line on my bikes, but then I'm also running DOT5 Silicone brake fluid. • What ever hose you dec...

I'm sorry, I'm having a hard time following you. Could you please post some photos ?

• You're certainly welcome. • This is the power of "community", which is why you join a club like this to begin with ! • This site doesn't "host" ...

First Thing: If your pet cock is the one with the plastic nib on the bottom to connect the fuel hose, then I highly suggest you start casting around f...

One last idea... Have you looked at the condition of the 3-pin ivory-colored connector coming off the bean can ? If there is any crazing, cracking, cr...

• There are ignition analyzers you can use. I've seen hand-held tubes about the size of your index finger to can hold against the plug wire and a smal...

Welcome Aboard ! First thing you'll want to do is contact your local Airhead Club director, what we call an "Air Marshal". Get on his contact list s...

The best way isn't always the easiest looking way. That's all I know.

The tube is pressed into the cyl head, making very good thermal contact. So first off, there's the issue of applying enough heat. Secondly, when you d...

In the old days, when this bike was new, tapping the collars down to cinch-up the PRT oil seal was a common mechanic's trick. It's highly conceivable ...

What does the weep hole say ? Nothing told us about the previous work. That might depend on the type of oil. At a minimum, I would try ...

Welcome Aboard ! Eye popping photo! Wow !! First thing you'll want to do is contact your local Airhead Club director, what we call an "Air Marshal...

Since this has occurred several times, there's no evidence that it will change its course in the future. A) The friction plate almost has to be of a p...