It's funny you should ask. I replaced the fork seals on a 1981 RT just last week !! • Simply stick a 10-12" common flat blade screw driver ALL ...

Does anyone make an after market clutch cable for 1991 R100GS? The new ones BMW sells are crap. I had two break in under 10,000 miles. I don't have ...

• This sounds like a PIA, and it really sort of is... but when your lights are brighter and your horn is louder you'll understand that those actions h...

Yes, you can wrap the spindle in an appropriate thickness "shim stock" and reassemble it. If the idea of future wear concerns you, then you can dri...

Btw, the turn signal makes an audible click, that I can feel when the key is turned on, also original. Should replace it I think. Do you have an Am...

I agree, $600 is robbery with a pen. Like I said, check the AirBazaar and post an Item Wanted if needed. I've had excellent luck there, and just sc...

Welcome Aboard ! Bing carbs have a Left and Right version (1 each) on the same bike. Those will have different numbers stamped on the outside. I do...

The first place to check is the Starter Relay, which is under the fuel tank. (I know, I know... it's a pain.) The reason for this may become very clea...

Went to let the clutch out, it grabbed and the bike shot out from under me, laid over and spun in a circle...in front of all my laughing roommates. ...

Welcome Aboard ! • Can you please tell us where the cable broke ? • Handlebar company Flanders was at one time making aftermarket cables for BMW...

OK, so I removed the bar caps one at a time and added center punch dimples to the top side of the bar. That fixed it ! Great suggestion. Thanks ag...

Any updates or news, how did it work out? I've contributed all I know, so I'm staying out and listening.Just ducked in to say Welcome Aboard !

I've already changed all the oils except the forks and brake fluid plan on that this week also new pad's, shoes, tires and throttle cables and a thoro...

Important point there, about the 22mm bars. Much obliged. Think I'll try adding some surface roughness to the bars via center punching. That's a ...