Last seen: 11/17/2024 07:37
There was a product mentioned on these pages, maybe a year ago, which is akin to the OEM Airhead tank treatment. If you are going through the trouble ...
I need to leave some issues for other members to answer. ?
It's either the power to the gauge, the gauge itself, the wiring from gauge-to-sender, or the sender. Start at one end and work your way in a logical ...
You may never get all the bits out. Once it starts, it won't stop coming. Obviously, a shake of the tank with a pint of gas and no petcocks, and then ...
You need to separate the reflector from the glass lens to take that part off. I rode like that for several years before I read the suggesting from Sco...
Check your clutch lever safety switch first. Those go out with frequency and your issue sounds like it needs some looking at. Hope this helps.
â–ş The Katdash IS very nice, but runs in excess of $400. It's main use is to repair the lamp connections. You see, the OEM flex circuit board has very ...
The RT seat I was telling you about had zero J-hinge pieces. In their place was a 1/2" dia post (about 2-1/2" long) added to the bottom of the seat. T...
Some thoughts... Installing wide angle GREEN LEDs for gauge back-lighting makes the cluster brighter, without making them glare or distract. Insta...
I believe BMW would supply whatever you wanted. My parents took delivery of a new RT in Germany about 1985 and that bike's speedo was in MPH. A...
STOCK On all my bikes, the hinge "pin" is welded to the frame. I believe both pins point to the rear. On the bottom of the seat are bolted 2 piec...
You're on your way !
You still need to wash off any residual brake fluid left behind. Hot soapy water is the trick. A LOW-pressure washer can be handy. You also still need...
It's like a #4 Plastite screw. You'll need a #1 Phillips to take it out. Because the screw can't "bottom out" on the soft rubber of the connector, it...
@john-young Please read the latest Welcome letter in the Discussions area placed there today. The third part of my response deals with brake m/c under...
Advertisement
