Sorry to be so long on the reply, but I've knocked off the system for months. I got to go with Scot on this one. There may be 200 piston ring makers...

Delighted that tip helped someone. It's not original to me, but one that was offered early on in my Airhead career. And the transformation, as per Bob...

By definition, every socket I own is a "wobbly socket". ?

I always love a happy ending.

@danforth-desena 1. Have your metal work ready to go when you go to talk to them. "Ready" as in "finished". 2. Your bill will be cut in half if yo...

@rider17 A photo would help.

@airhead-tom Those are very good shocks. You won't be sorry. I had a Ikon on a single sided and it was fabulous. The only difficulty I experienced...

That's one of those where you don't want to "count your chickens". Due to the highly absorbent foam, seat pans always rust out from the inside. The fi...

John - Are you talking about the threaded nut attaching the petcock to the tank, or the threaded cap attaching the plastic barb ? The threaded nut...

Purple fluid sounds like some fancy synthetic oil. Sounds like a couple of things were being done. As for the springs, make sure they are the same l...

No kickbacks here. They must be needing some business because I get an email every 6 months.

@gpopovichcastlerockwinery-com If you want to keep your new fork covers nice for a long time, keep them away from detergents. Those seem to leach ou...

► My bad on the white connector/ bean can. I was still thinking of a newer bike in another thread. You simply have basic ignition points. You'll wan...

That's how it usually goes. Spring pops up, gets in the way, ruins your day ! The fork is a complete hydraulic system. So the oil is not simply goi...

• Upon entering the inner cover, first thing you do is stuff a rag into the hole leading to the oil pan. Three guesses why you want to do this. ? •...