If your old pads have worn at a strange angle, then you might want to install a new pair. If you don't know how old your pads are, then you might wa...

That's good news ! Congrats.

My guesses are: • The clutch may be slipping. Despite all appearances to the contrary, please check for free-play in the actuator arm. • Idle set...

If this is a hex nut, then you must use the correct fitting 6-point socket. Most socket wrenches are 12-point. A 6-point socket gets a much better gra...

A set of Airhead brushes can be purchased very easily for a minimal ~$5 fee. Of all the Airhead repairs you can do, this one is one of the very, very ...

NOTE: It is very nicely sealed, to prevent rain and wash water from killing your 2 gauges. Unscrew the speed drive cable from the bottom of the spe...

I have tried that, and the problem is not what you'd think ! To do what you describe, you'd need a generic automotive battery cable... which are avail...

The information James gave you is all excellent information, but I like to check the very simple things first:• The Airhead charging system cannot wor...

IMHO, the issue stems from the fact that as a battery connection bolt, that bolt must be tight in order to convey the current required for an electric...

Thoughts....> Can you possibly detail your overall towing experience? For the novice, even experience with automobiles can be helpful.> The trai...

Come by in a truck. I have more body parts than I can possibly ever ship.

If the sub-frame was bent from having the rear fender smashed, then it will typically no longer be horizontal. That will be very evident using the lev...

You'll need a level and a plumb bob. Shim the bike at the center stand until the swing arm is level. Then remove the seat and run the same level along...

Your comment is not attached or quoted within the thread with the balance of the information to which it refers.

My theory is that you need to post photos and links to what you're trying to discuss.