► My brother (the electronic gizmo junkie) provided me with a system off Amazon and it worked pretty well. These units work by having a small transduc...

Welcome Aboard !

Compare the new one to the length of the one that was in there of course, but my understanding is that there are small changes in the sticks for diffe...

Contact your Air Marshal.

Remove the Starter Cover from the top of the engine and look for a nest that is blocking the air path. You'll need to remove the tank, but after that ...

Some pans came with the facility to have an oil temp sensor installed. The hole needs to be plugged with a threaded plug of the same thread or a spare...

• Replace ALL the fuel with fresh (bought this week) gasoline. • Adjust the valves. Airhead valves tend to tighten up. • Set both carb pilot screw...

Why does every bike you own need a carb rebuild ?

Just buy the Bob's or the Speigel kit and be done with it. The way BMW has the 1 into 2 mounted on the frame keeps the system from being self-bleeding...

> If one flex hose failed, then I would replace them all. They've all seen the same caustic brake fluid and the same abuse. > There's nothing...

► I believe the fuse box on an R80 is on the Left side of the frame, under the fuel tank, just in front of the LH side cover. You won't see it at firs...

"The devil is in the details." Congrats.

1. The vacuum leak you need to concern yourself with is between the carb and the cyl head. 2. Is there, or is there not, a screw blocking the end of...

• No it does not make sense. Your throttle cables are too tight or your slide isn't going all the way down. This has already been covered (with zero f...