As I'm running towards the upper range of the shop manual spec re ring gap, I'm considering an oversize ring. So if using a 0.5mm oversize ring to be...

Holy cow! Forty six views in a week and no opinions??? There never seems to be a shortage of opinions (good and bad) on the Guzzi site!!

Got it!! A week of soaking in penetrating oil and some more heat did the trick without any drama even with the 2-arm puller. Got the two bolts holding...

Got it!! A week of soaking in penetrating oil and some more heat did the trick without any drama even with the 2-arm puller. Got the two bolts holding...

Oil is a contentious issue with vintage vehicles but I have had very good luck with 20W50 Valvoline VR1 Racing Oil in all my vintage bikes. It has a g...

I have had generally pretty good luck with Westco AGM batteries. I have had a dud or two but that seems typical with batteries these days. If you can ...

. . . I guess some of you are probably wondering "why does he need to pull the cam"? Good question. I probably don't.If you want to replace the cam sp...

Thanks! I have seen this excellent article and I referred to it when I was removing the crankshaft sprocket and nose bearing. He doesn't deal with cam...