From another and recent thread I've been following: "• No, my bad on the 24V VR, it needs to be 12V. I simply rushed over to Ebay and copied the li...

I had exactly the same problem on some mikuni carbs on a honda with a very similar transverse engine but water cooled. 1100rpm normal shooting to 2000...

Yep! At close to AUD$ 700 (US 500) for a new used wheel, not sure. I can get a hold of a rim for about US200 but would like to confirm that hub and...

I'm a little confused as to my front wheel. All the specs I've seen quote the R75 as having a 19" front wheel. Mine currently has a 100/90-18 tyre (s...

Could be a leak in intakes. Squirt some carb fluid and see if rpm goes up.

Thanks for the heads up on the battery. Fortunately no battery connected so no danger, but will keep it in mind as a priority. I did manage to hook ...

I'm new to airheads, and haven't reached that part of my rebuild, but I have used All Balls and Slnky Glide on steering stems on other bikes without ...

Both the relay and the master cylinder look in bad shape from attack by the corrosive fluid, so I will definitely be looking at the Dot 5 solution. Th...

Thanks Richard. Some very sound advice. I actually read your sticky at the beginning of this forum on getting the bike on the road. It makes sense. I ...

Ok, back online, so let me say a few things about myself. I do like pina coladas, and getting caught in the rain......oops. Wrong website. This Cu...