Thanks for the reply. I too set them flush and tonight installed one of the cylinders on the engine. There was a lot of compression on the seals as ...

I got some help from the MOA. Someone who has Oak's top end manual shared an image of their placement. The stop collar should be even with the botto...

I was told that Honda Moly 77 was the replacement for Moly 60. That's what I intend to use when I put the transmission back in. Never heard of that ...

I should add that picture was taken before I put the 30 to 45 degree cross hatch pattern to the bore.

Hello, I finished the honing a couple days ago. The rust didn't clean up fully but I am already at the maximum diameter allowed (3.23in). Since a c...

Thanks for your help. I attached a picture of the rust in my first post. The bike had oil leaks from the tube seals and rear main seal. There is no...