@bob-thomas I have a magnetic tank bag. I used it for a few months on my R80. Investigation showed a lot of small scratches where the magnets contac...

OK, this is hopefully the "Next to Last Chapter" in this saga. All the components arrived, everything bolted right up. Bled the brakes in a FRACTI...

More news on the Big Brake "Upgrade". Sourced a pair of Ducati rotors ($150) and a pair of S100RR calipers for $150. Cut up the fork leg so the bit...

@frankj Frank. What is the Airhead email list? I'm diving in on this, but would love to hear any tips if anyone else has tried it.

This picture shows the part that will support the Ducati 320mm rotor. It bolts to the wheel, and the rotor bolts to this. Of course, the stock rotor...

Previous reply showed all the components received in the kit. This picture shows the piece that will replace the Stock caliper pivot bracket and pro...

Got the kit in the mail today. Richard, as for your reply on 2/2. All those items have been addressed as per my post on 1/24. New everything, incl...

I've have chosen to purchase this kit. Before I take things apart, and hack up my left fork leg, I'm going to measure several 50-0mph stops. Front ...

@wobbly Thanks for the reply! The "Kit" should I decide to go that route is $250. A rotor off ebay... $125+? A caliper off of an S1000... Saw ...

@wobbly So did you stay with the stock caliper and just upgraded the discs? This kit provides mounting for a four-pot caliper from a modern sportb...

I thot I had replied to this old thread with my solution. I guess not. Anyway, just in case anyone else is dumb enough (like me!) to beat off one of...

Dang, it seems like if someone was going to fake a VIN number they could have done a far better job than THAT! A couple bucks at harbor freight for ...