FORUM

James Strickland
James Strickland
@8053
Reputable Member
Joined: 07/27/2020 17:03
Last seen: 11/26/2024 12:16
Topics: 17 / Replies: 406
Topic
7 years ago
Replies: 3
Views: 4117
Reply
Stripped drive shaft drain plug

To put reverse pressure on the stubborn plug, I would consider using a "Wonder Bar" or other nail puller and grind out the notch to the size of the...

7 years ago
Reply
Better bike a 1975 R75/6 or 1977 R75/7?

"...Hi, I think the color is already growing on me, I appreciate it more daily. Now I am excited for summer to arrive. I will start reading about t...

7 years ago
Reply
Better bike a 1975 R75/6 or 1977 R75/7?

Congratulations! That color was /is called Havana Gold. Think of a Cuban cigar with a gold band on it. If you are at all concerned about value as...

7 years ago
Reply
Better bike a 1975 R75/6 or 1977 R75/7?

I agree completely with Wobbly on this one. The mileage is not much of a concern on Airheads until you get to the 50K to 70K mile range. My obs...

7 years ago
Reply
Rear wheel and rotor

The part number on the fiche is not the same as casting numbers on parts. As for interchangeability, compare the part numbers on the fiche and make ...

7 years ago
Forum
Reply
1984 R100RT Right Carb Running Rich

O.K. Bret. First off, I have never owned or worked on a bike with 40mm carburetors, I would go with the assumption that they are similar in function ...

7 years ago
Reply
1984 R100RT Right Carb Running Rich

..."Very slight, perhaps a couple thousandths, up and down movement of jet needle in slide."... My next move would be to get to the bottom of that ...

7 years ago
Reply
Newer guy

Great looking bike. There are a great many Airhead members in the greater Chicago area. Be sure to contact me if you have questions about your bike. I...

7 years ago
Reply
Rod bearing destroyed after visit to repair shop

Many years ago, I had a BSA Thunderbolt that developed a rod knock after an episode of spirited riding. I never did determine the exact cause. Are yo...

7 years ago
Reply
Rod bearing destroyed after visit to repair shop

..."The only reason not to buy a used engine is if you need that particular engine number due to a special model or limited edition."... Numbers ma...

7 years ago
Reply
Rod bearing destroyed after visit to repair shop

..."I guess we now have to do all our own work?.... I made that decision many years ago. I guess you could open up the oil filter chamber to s...

7 years ago
Reply
Rod bearing destroyed after visit to repair shop

How many miles on the motorcycle? The only service on the list that might have an effect on the internal motor parts would be the oil change. Did the...

7 years ago
Reply
final drive screw plug stripped

You might be able to fit a plug with "oversized" threads. I once used an oversized piggy back plug on the drain hole of a 4 speed transmission of a /5...

7 years ago
Reply
Subsitute ignition switch plate

I saw a /5 several years ago that had a replacement switch with an actual key installed in the top of the headlight where the original set-up used t...

7 years ago
Page 20 / 29

Advertisement

Scroll to top