You will definitely want to replace that speedo cable boot. It is not unusual for an owner to re-locate the ground from the speedo retaining bolt to ...

This is important! When you get to the place where you want to remove the flywheel, you must block the crank from moving forward.

Jason, I am glad that you made the trip. If you were wanting some hands on assistance, I regret that you may have been denied. According to Gina, it ...

Except for the highly critical motor studs and the swing arm pivots and lock nuts, I have always used what Robert Pirsig called the " mechanics feel"...

Wobbly is correct about not over torquing these, or anything on an airhead. The rocker gaskets on my R75/5 have been there for many years. If you chec...

It was probably the cold temps that caused this. Be sure to monitor the oil level closely. It happened to one of our IL. members last year on his firs...

I have never used any sealer on rocker covers.

I used a what is called a piggy-back plug with oversized threads on an R75/5 with satisfactory results. What you get is a plug threaded in to a plu...

It is my understanding that the CS stands for "Classic Sport". Legend has it that these were offered after the R100S was no longer available. I'm thi...

Beautiful Bike. Be sure to check WhAIR and When for events in IL and surrounding states. Hope to meet you this season.

On brackets that I have owned, the lower leg attaches at the hole that has the long scratch mark going upwards to where the flat part wants to rest i...

The extra lift of the center stand is a useful feature, allowing the rider to remove a wheel easily. The way to avoid a tip over is to apply a ratchet...