FORUM

David Elkow
David Elkow
@4949
Reputable Member
Joined: 08/24/2020 18:19
Last seen: 10/01/2024 18:07
Topics: 12 / Replies: 307
Reply
RE: R100S Won't Start After Carb Overhaul

I have always gone with - the fuel just shuts off when the float reaches parallel with the carb body. Snowbum has an actual depth measurement somew...

2 weeks ago
Reply
RE: R100S Won't Start After Carb Overhaul

Oops - editing here. I forgot that the enrichment circuit also draws air thru a port on the intake end of the carb at the 3 or 9 o’clock position. Whe...

4 weeks ago
Reply
RE: R100S Won't Start After Carb Overhaul

IMHO, if it just spins (w/spark) on full choke and doesn’t fire, the enrichment circuit is not working. First, are the carb butterflies closing ok? V...

4 weeks ago
Reply
RE: R100S Won't Start After Carb Overhaul

Have you found the problem? Going back a bit - when you say it won’t start - does it just spin without firing, or does it fire and try to start? If ...

4 weeks ago
Reply
RE: R100S Won't Start After Carb Overhaul

Did you disassemble the chokes (enrichment valves)? They are not interchangeable right and left. Must go on the correct carb. Also the shaft must be ...

4 weeks ago
Reply
RE: Wedgetail Ignition System Availability / Warning

With 3 years of use now in my ‘78, I feel comfortable recommending the Enduralast/Sachse system from EME. Mine is the model fit to my stock Bosch alte...

2 months ago
Reply
RE: Rocky Point Ignition installation guidance needed

Rick Jones at Motoelekt.com sells an LED headlight that replaces the entire stock unit w/reflector. Has a version for the /5. Looks cool, too.

2 months ago
Forum
Reply
RE: pipes

That’s great! Tricking out your airhead at 86 years old! Congratulations and Happy Birthday!

2 months ago
Reply
RE: Spark plug carbon fouling

And, your needles are still at the first position (leanest)? Hmmm … what could it be? Air filter is good. You’ve been under the starter cover and ...

3 months ago
Forum
Reply
RE: Spark plug carbon fouling

I have a ‘78 R100 with 40mm Bings. I was chasing a carb issue years back. I wanted to eliminate the enrichment circuit as part of a process of elimina...

3 months ago
Forum
Topic
Replies: 1
Views: 81
Reply
RE: New Old member in Arizona. Hi All, I'm back!

Glad you are back! Very nice airhead, once again! I was a club member early on, with my ‘78 R100 w/Hannigan. Then dropped out when life got in the ...

3 months ago
Reply
RE: 77 R100S Bing Needle

The needle is held in the piston by a wire spring clip that engages the grooves cut in the top portion of the needle. There are 4 sets of grooves, tha...

4 months ago
Forum
Reply
RE: Airheads near Nashville?

Mike, hope you found a fellow airhead or two!

4 months ago
Page 1 / 22

Advertisement

Scroll to top