
Last seen: 02/09/2025 14:14
Talk to your DMV. If a VIN is checked to determine if the bike is stolen the absent owner's name will probably show up. Even though Georgia does not t...
The 71 has a heavy flywheel, with a 8 tooth starter. The 81 uses a clutch carrier with a 9 tooth. The input shaft on the 71 is longer than the 83. The...
The screw on the bottom is the idle MIXTURE screw. It adjusts the idle mixture. The amount of fuel getting to the cylinder is dependent on other thing...
It is listed in when and whair. Duck's phone number is at the bottom. Please call to get numbers for food. Park is west of I75 on US 280 near Cordele....
Without more information, I can't answer your question, but there is the possibility the wheels are a different width. Bob
I can't send a picture but can give yu this information: The dual tower ignition coil has two black wire on terminal 1; two green/blue wires go to ter...
I can't send a picture but can give yu this information: The dual tower ignition coil has two black wire on terminal 1; two green/blue wires go to ter...
Welcome to the forum. A man who does his own work will feel at home here. Bob
When I fixed things fir a living, I knew how to fix the things I worked on regularly, anything else usually took some time to find information to trou...
You did set the valves correctly on the compression stroke-right? Set one side rotate 360 and set the other. Bob
Use your DVM. It may have a diode range or else it should read low resistance one direction and high the other. Yours is probably shorted. With Radio ...
www.twistedthrottle.com/bungie-buddies
Since the fuse originally blew while the engine was running and subsequently cranked and idled without blowing the fuse, I disagree, it is a starter p...
Since the fuse originally blew while the engine was running and subsequently cranked and idled without blowing the fuse, I disagree, it is a starter p...
No. Speedo drive is from the transmission output. Bob