Anyone know where I can find out which terminals go to which wires on the clock and voltmeter? I'd like to get these working if possible.

Excellent, thank you! I think mine already has the thumbscrew installed.

That is excellent information! Thank you so much. Do you have a diagram shoeing the port blocking screws for where to attach the harmonizer? Which one...

We know it runs as we fired it up when I first went to look at it. Pretty impressive on old gas. Once the carbs are cleaned up and balanced it should ...

The fuel stabilizer isn't a bad idea. Our local fuel is pretty good so I'm not worried. Who knows the last time these carbs were really looked at. I h...

I pulled one of the carbs off to take a look. It needed some serious cleaning on the back and looking at the slide it's obvious they need a rebuild. J...

I like the ABC to be all about airheads. I think it makes sense to keep it as owning airheads but as a lot of members age out we will be losing more m...

Anyone have any preferences for tires for an R100?

Next up bleeding brakes. Been awhile since I've done this on anything so it should be fun.

I did the JB Weld fix and I think it is totally bomber! I'm not worried about a little paint.

The JB Weld fix looks like it worked very well. I added a 2nd coat for a little extra reinforcement. I remember reading in plenty of places to chec...

Ok great, that is good info. I haven't dug very far into the windscreen yet. I was using SP1 to shine up the bike and it brought the windscreen back t...

Thank you for the insight Richard. The piece that is cracked out is one of the bolt inserts-no surprise. Upon inspection it had been fixed before but ...

Anyone have any good ideas for a fix to this little crack in the fairing? I hear it's ABS so would need a proper glue.

It's in the shed, going to get it registered today.