Ok, here are a couple of pics of the components. voltmeter Clock, the blue wire goes to the bulb and there is another wire connecti...

Just about to start work, we'll see when I can get some time working on it again. I'll see if I can get the clock out, getting at the mounting nut is ...

Great! Just started the carb rebuild last night and one of the screws for the butterfly snapped off. I'll take a stab at drilling it out but my guess ...

It does a little bit but looking at the back of each instrument there are 4 or 5 terminals. Looking at the wiring diagram they go to the 6 pin connect...

Anyone know where I can find out which terminals go to which wires on the clock and voltmeter? I'd like to get these working if possible.

Excellent, thank you! I think mine already has the thumbscrew installed.

That is excellent information! Thank you so much. Do you have a diagram shoeing the port blocking screws for where to attach the harmonizer? Which one...

We know it runs as we fired it up when I first went to look at it. Pretty impressive on old gas. Once the carbs are cleaned up and balanced it should ...

The fuel stabilizer isn't a bad idea. Our local fuel is pretty good so I'm not worried. Who knows the last time these carbs were really looked at. I h...

I pulled one of the carbs off to take a look. It needed some serious cleaning on the back and looking at the slide it's obvious they need a rebuild. J...

I like the ABC to be all about airheads. I think it makes sense to keep it as owning airheads but as a lot of members age out we will be losing more m...

Anyone have any preferences for tires for an R100?

Next up bleeding brakes. Been awhile since I've done this on anything so it should be fun.

I did the JB Weld fix and I think it is totally bomber! I'm not worried about a little paint.

The JB Weld fix looks like it worked very well. I added a 2nd coat for a little extra reinforcement. I remember reading in plenty of places to chec...