just sitting'

b03e9e460c32a02c478072e4c6c64838. DVR #26

b03e9e460c32a02c478072e4c6c64838. DVR #26

As you work on the new bike ....... i'd draw your bikes wires, colors & connections before you remove any wires first. dated and placed into a s...

true be told here Wob it's a red electropod & a white electropod the 'red' pod . . shows red thru the amber lens, the white 'pod' . . ...

i haven't yet converted the front RS blinkers but i did the rears years ago. I made a new plate and attached the electropods. 06dee549f56afad1f1...

I have Often said :: get several wiring diagrams for your shop binders. have them copied in Color if possible, make them 11'' x 17'' get 3-5...

I wouldn't whack the middle unless you have a Good Welder I'd take the end and modify that. easier to cut off and heat the end . . . . or better ...

I Bit that bullitt . . . . . twice for my R90 i cheaped out and bought a used one off fleezebay and got Snookered ended up buying a new one. ...

there are many great but short cowl mounted racks to there. the one shown @ the start of the thread is a very stout model. a '' COWL'' mounted o...

you may not like this answer butt GO thru ALL wire connections over the winter and TIGHTEN every spade connector, SCRAPE every male / female...

you may not like this answer butt GO thru ALL wire connections over the winter and TIGHTEN every spade connector, SCRAPE every male female spade...

it's a blue / black = right blue / red = left brown is always Ground yes it makes a difference glad it's fixed

WHY don't you post some pics so those who have no clue can understand ...... like me, unless you are speaking about the Rick Jones Moto-eletrik tail /...

you can always use a router or other devise / a die grinder if you're skilled at straight lines and ADD some venting. i don't run an oil cooler on...