Thanks for all the help I will let you know what I find.

I let a shim drop down one time

I havent pulled flywheel off but it was done at a dealer a few years ago. I learned my lesson on that the hard way.do you think i need to look at the ...

The seal seems to be running were it should on the input shaft i think the tranny is ok. Ihad the tranny out a few times and have seen nothing wrong

I guess it would be the front shim

I tryed to measure it. I think there was about 3 thousands. But I didn't have my dial indacater was setting on the exhaust didn't have the right end t...

Yes and I think all the parts taken out were original.

This bike has the new style throw out bearing they call it a piston and a new style pushrod nothing between then that I no of. Looked at a 92 and that...

The parts all looked the I measured everything and part numbers match. I will look at snowbuns site. Thanks

The flywheel looked ok to me but this is the first time I've seen one. I looked for a measurement on the height but haven't found one yet.

The input shaft looks and feels good. It does have a new diaphragm spring. I am thinking the flywheel or crankshaft end float it seam like the spri...

It is a stock BMW clutch

It started with old clutch. Put new clutch in complete and new push rod the throw out bearing is good. The throw out bearing or piston does not extend...