If the carbs are crud, you'll need carb cleaner. The problem is likely to be the jets, needles and float valve, any part with brass. When I did my CV ...

Hi Andre, I lived in Manassas VA years ago, back when Dullas access was for the airport only 🙂 Electrical Engineer for GE but the traffic drove me...

That BatteryMINDer looks pertty sweet, but I've already ordered a "Megaboost Battery Maintainer MB1100 Lithium" from Revzilla. It's also ambient tempe...

Yeah right now I need to get that new battery to get the bike started to then check actual charge voltage at 3000rpm. I've found a Duracell ETX16L(mad...

Donggone, love those amps but still too fat 🙁 After more digging I suppose it's another ETX16L(seems this alpha numeric is an industry definition of ...

WOW your 80/7 has a big battery box area! If Amazon is correct the PC925 measures 11.4 x 10.3 x 8.3 inches. While my 81 R100RT box is roughly 7x5x6 i...

Thanks Wobbly for that tidbit on charge voltage. I've never owned an AGM before this bike. Can you point me to this adjustable voltage regulator for t...

WOW, I've had 3 different airheads, ride them hard and NEVER once had a float bowl come off. And I do wear Army issue leather lace boots to boot. Thos...

Hi 15087 & jnicks01, good idea on tire pressure I’ll give that a try next ride. Thank You.

Hi Wobbly, I’ve normally set my settled suspension to 1/2 the travel but I’ve neglected checking this bike. I suspect the front springs might be wea...

I put in just a bit of air pressure to give the tube shape. I also leave the tire in the full sun for a bit to warm it up. Next I use a bit of soapy w...

I have Avon Roadriders 4.00x18 54V and 3.25x19 64V with inner tubes on my 1981 R100RT. I've put about 4200 miles on them and they are still nice. I've...

LOL, Not an Argument! 🙂 But seriously nothing was bought was from China aka Cheap Chinese Cra*. Although generally the quality has improved greatly i...