David has given some good insight into perhaps what your problem is. Plug color can change mildly depending upon riding conditions. Traffic and sto...

Greg, to be honest I would need a better description of the issue or pictures to answer you. Your speedometer is pretty well built and frankly I have...

I would go with either your first or third option. I have not looked at the kit that Aerostitch sells so I could be wrong but, there is a good possib...

Some people know the value of the members who answer questions on the forum and are polite enough to reply, of course I am not directing my ire at you...

I am on a pretty high speed system and have noticed a slow down in the website. Particularly the forum. St.

You are welcome Mike, Cheers, St.

So might I ask why are you looking on Ebay or Amazon for BMW motorcycle grips? Airheads magazine has a few companies who sell all kinds of equipment ...

I am not going to go into great detail. Richard gave good reasons against the plan you have. I personally would not try heating jugs to that tem...

Don, thanks for the update. As for all this, beam pattern is mostly due to light controlled (sorry not a good word) by the glass lens of the headlig...

As long as you are using a relay in the fog light system, you can use almost any switched hot wire for the switch side of the fog light assembly. On ...

Ok, I didn't read the thread title I am sorry but as I wrote, two completely different assemblies for 78 and 83, St,

In my experience with my bikes, I have found relays quit more than the switches. I have replaced three relays in 40 years and zero switches due to b...

Ah fellows, you have an unknown year bike (Eric) and David with a 78RS. Brook was working on an 83RS. Two completely different flywheel and clutch...

Good show, St.