I'll add this because and possibly Dave Fahringer  is NOT an Airhead member and has no ABC access for

 this correction needs to be seen :

There’s a serious error in my Wedgetail article in this month’s airmail.

At some point in the editing process 36 INCH pounds for the torque on the
nut on top of cam shaft was changed to 36 foot lbs.  if you use foot lbs
you risk snapping off tip of camshaft.  They will be printing a correction
in next issue but please do not use the erroneous data.

Have a good one,
Dave
--

Dave Fahringer
(309) 826-8332
dave.fahringer@gmail.com