Diode board installation.
I'm installing an upgraded diode board I bought from Euromotoelectrics in Denver. The installation instructions aren't proving to be very useful and I turn to the airhead community to help me decipher the wiring.
New leads come with the board and my existing ones look fairly worn so I want to change out what I can.
The brushes are new and I installed a standoff kit behind the board.
The bike is a 71 R/75 5 and the charging system looks to be stock.
I got everything buttoned up after finding a schematic on the company web page and double-checking with Radar in Longmont, CO. At about 1,000 rpm I read 14.6 volts. I haven't road-tested the installation yet so I'm not considering the job done, but no showers of sparks so far.
Thanks for responding.
- 27 Forums
- 1,867 Topics
- 10.6 K Posts
- 2 Online
- 5,816 Members