1974 R90/6. I removed the Krauser luggage and frame which held the rear turn signals. I bought a used OEM stalk that holds both rear turn signals and ran the wires through the stalk to the signals. I wired it wrong, I ran the wiring to the wrong side. If I switched the left turn signal on the right turn signal blinked. Same for the right side. It also blew the fuse inside the headlight bucket. I re-wired the rear turn signals to the correct sides. Now when I switch on either turn signal all four turn signals flash at the same time. Could there be a problem with the relay?
thanks 14724. I went back, looked at schematic and found the blue wire was not connected to the bulbs in the rear signals, I had them crossed up, I didn't think it made a difference. But it does. So there ya go!
it's a
blue / black = right
blue / red = left
brown is always Ground
yes it makes a difference
glad it's fixed
Advertisement
