FORUM

Notifications
Clear all

Replacing Rear Shock absorber R100 monoshock

4 Posts
2 Users
0 Reactions
4,872 Views
Mike Whitworth
(@mike-whitworth)
Posts: 5
Active Member
Topic starter
 

Hi All
my 89 r100monoshock with 65,000 miles on the clock I need advice about choice of a replacement rear shock. The problem I am having is my wife complains that her back hurts when we go over potholes in the road the rear shock appears to be in good condition and the damping on it seems ok but logic tells me it is over due for replacement .
any suggestions as to choice ( much as i would love to fit Ohlins I cannot justify the price ) i am not looking for racetrack performance It is an ahead and I want comfort over out and out handling
I live in the UK and would appreciate general advice as apposed visit such and such dealer .
Regards to all and ride safe.
Mike

 
Posted : 05/10/2017 07:24
Richard W
(@wobbly)
Posts: 2592
Member
 

Although I'm looking for a mono-shock bike and don't own one, on all my twin shock bikes Hagon has done very, very well. Therer are more expensive and probably better shocks, but they are definitely the least expensive, Grade A shock on the market.

Owning an old Airhead is easy.
Keeping an old Airhead running great is the true test.

 
Posted : 05/11/2017 07:54
Mike Whitworth
(@mike-whitworth)
Posts: 5
Active Member
Topic starter
 

Thanks Wobbly for taking the trouble to reply , I have seen the Hagon shock advertised but never heard from any one who has used them .
Thanks again
Regards
Mike

 
Posted : 05/12/2017 07:12
Richard W
(@wobbly)
Posts: 2592
Member
 

► Hagon is a British concern and I've been very please with their product and service. Although several shops sell them, you want to deal directly with Hagon USA. They'll get your weight and load, then set your spring up just for you. The shock will come right to your door in several days.

http://www.hagonshocksusa.com/

Before removing the old shock, place the bike on the center stand. Then use a scissor jack or wood scraps under the tire to take all the weight off the swing arm. This will keep you from struggling to get the new unit into place.

► You might wish to use the intervening time to change your front fork oil. I would recommend one of the name brand synthetic fork oils, such as Bel-Ray. Their 7W is equivalent to ATF, which is generally used in most modern street bike forks.

http://www.belray.com/bel-ray-high-performance-fork-oil

Hope this helps.

Owning an old Airhead is easy.
Keeping an old Airhead running great is the true test.

 
Posted : 05/12/2017 07:48

Advertisement

Scroll to top