FORUM

Notifications
Clear all

'84 R80: One cyl not responding to throttle

3 Posts
3 Users
0 Reactions
829 Views
paul peterson
(@r80pete)
Posts: 21
Eminent Member
Topic starter
 

Just installed rebuilt carburetors on bike sitting outside for six months, but covered. We did have some rains. The bike runs, but poorly. When I pull each throttle cable separately, the right side responds, but the left side barely does. Both exhausts get hot. Any ideas would be much appreciated.

 
Posted : 07/27/2020 20:32
Richard W
(@wobbly)
Posts: 2597
Member
 

Have you reviewed all the information and ideas contained HERE ??

Owning an old Airhead is easy.
Keeping an old Airhead running great is the true test.

 
Posted : 07/27/2020 21:41
john stirling
(@arni)
Posts: 81
Trusted Member
 

With the bike running at about 2500rpm when you pull one throttle cable you open the butterfly on that side. The vacuum from this in turn causes the diaphragm to raise the throttle slide. If the engine did not speed up the diaphragm did not work. It either has a hole or is installed incorrectly.

There are other possibilities but that is the most likely one.

 
Posted : 07/30/2020 11:31

Advertisement

Scroll to top