Owners of early BMW twins are divided into two sorts; those whose centre stand bolts have failed and those whose bolts are going to fail soon. The root of the problem is that on the pre-square air filter models the stand pivots on bushes retained by a pair of bolts which screw directly into the frame. The continued heaving on and off the stand eventually loosens the bolts and the threads in the frame will start to fret. Retapping the frame to the standard thread (M10x1.25) and replacing the bolts delays the evil day, but when I found a bolt lying under the bike only days after doing this, I knew it was time to look for a better solution.